Head Office UTTARA BANK BHABAN (4th Floor)
90,Motijheel C/A, Dhaka-1000.
Bangladesh.
ETA
Centrigugal pump
Applications Agricultural undertakings, Irrigation & drainages, General water supply duties for
Municipal, Community, Industry & pressure booting. Semi open Impeller Pumps available for paper industries.
Materials of construction
Volute casing, Impeller, Suction cover, Bearing stool etc. are made of Cast Iron(Bronze or SS for special requirement)Shaft made from cold drawn carbon steel(SS for special requirement)
Specifications
Size
NW
40
to
250
mm
Capacity
Q
up
to
550
m³/hr
Total Head
H
up
to
100
meter
Discharge Pressure
P
up
to
8.50
bar
Temperature
T
-10
to
130°
C
Speed
N
up
to
2900
rpm
SLUICE VALVES
Sluice valve of DIN 3216 standard for water
Materials The selection of the correct material of construction for valves body from the wide choice
available is government by the pressure, the temperature and the nature of the fluid flowing
through the valves.
Standard execution
::
Body, dome, wedge gate, Stuffing box and hand wheel are of Cast Iron.
::
Face ring in body and on the gate are of Bronze, an alloy of high wearing
qualities material naturally developed for use in valves and fittings.
::
Spindle of forged bronze upto valve size NW 100 and stainless steel for NW 125,
150 & 200.
::
Spindlenut, gland bush and gland nuts are of bronze.
MOVI
High pressure multistage pump
Applications Irrigation, water, General water supply, Fountains, Pressure Boosting, Pumping of Boiler Feed water,
Cooling water and Hot water Circulation, Pumping of Condensates, fire fighting etc.
Specifications
Size
NW
32
40
Capacity
Q
upto
42
m³/hr
(0.41 cusec)
Tatal Head
H
upto
400
M
(1300 ft)
Discharge Pressure
P
upto
40
bar
(570 psi)
Temperature
T
-10°
to
+140
°C
Speed
N
upto
2900
rpm
Deepwell Turbine Pump
Water Lubricated, vertical, Single stage or Multi stage Turbine Pump
Applications Agricultural undertakings, Irrigation & drainage. Drinking Water supplies for Town and
country. Industrial Water Supply for Trade and industry. Lowering of ground water water table
on construction site
Specifications
Well Diameter
D
8″
to
20″
Delivery size
NW
3″
to
8″
Bowl size
A
5.5″
to
11.5″
Capacity
Q
upto
300
m³/hr
Total Head
H
upto
100
meter
Speed
N
upto
2900
rpm
Motor rating
HP
upto
125
Submersible Pump
Submersible Motor Pump
Applications Agricultural undertakings, Irrigation & drainage. Drinking Water supplies for Town and
country. Pressure Boosting. Industrial water Supply for Trade and Industry. Specifications
Well Diameter
D
6″
to
14″
Delivery size
NW
50
to
250
mm
Capacity
Q
up
to
360
m³/hr
Total Head
H
up
to
450
meter
Speed
N
up
to
2900
rpm
Voltage
V
360
to
440
v
Motor rating
HP
up
to
250
Reflux(Non Return) Valves
Cast Iron reflux Valves DIN 3232 for water
Applications Agricultural undertakings, Irrigation & drainage. Drinking Water supplies for Town and
country. Pressure Boosting. Industrial water Supply for Trade and Industry. Specifications
Reflux Valve is a one way shut-off device. Flap opens in one direction automatically permitting the
flow, while reversal of flow is prevented as flap door closes under the action of gravity and back pressure.
Demestic Pumps
mono-block Domestic pumps
Applications Used for Domestic water lifting purpose
Any of the above products can be made from any special material as per customer’s requirement.
Also manufacture Parts and products of special alloy steel and S.G. Iron as required by customer as :
Crushing Jaw plates of Stone crushing machines from Hadfield Manganese steel, Excavator teeth, Cement mill liners Manhole covers of S.G Iron and other spare parts for construction machines, Cement mills etc.
